Selected Macro Equipment
1 - Haas EC-1600 Horizontal Machining Center Horizontal Machining Center
- 64" X-Axis Travel
40" Y-Axis Travel
32" Z-Axis Travel
Full Rotary Axis, 30" Diameter
10,000 lb. Table capacity
50 Tool Capacity Tool Changer
High-torque 30 HP, #50 taper Spindle
High-pressure thru spindle coolant
Full Part and Tool Probing
1 - Okuma LU 45-M Mill-Turn Lathe
- 26" Cutting Diameter
39" Length
4.5" Bar Capacity
10 HP Milling Spindles
60 HP Main Drive - 15 and 25 inch Chucks
1 - Okuma LC 40-M 2SC Mill-Turn Lathe
- 18.25" Cutting Diameter
29" Length
3" Bar Capacity
5 HP Milling Spindles
50 HP Main Drive - 12, 15, and 18 inch Chucks
These two Okuma Machines have live spindles for secondary operations like milling, drilling, and tapping. This can eliminate separate operations and give higher productivity and accuracy. They are five axis machines (the spindles are a full rotary axis), and have dual independent turrets.
1 - Mori Seiki SL-6 Lathe
- 25.5" Cutting Diameter
32" Length
3.5" Bar Capacity
50 HP Main Drive - 15 and 22 inch diameter chucks
4 - Mori Seiki Lathes (Mori Seiki CL-25)
- 17.7 " Cutting Diameter
Up to 78" Length shaft capacity (Mori Seiki TL5-B 2000)
Up to 3-1/2" Bar Capacity
12 inch capacity steady rest
1 - Okuma LB-15 II
- 9.8" Cutting Diameter
39" Length
2" Bar Capacity
4500 RPM Spindle
1- Fadal VMC 5020A
- 48" X 20" Table
50" X 20" Travel (X-axis X Y-axis)
Extended 28" Z-axis travel
Through-the-spindle coolant
Temperature controlled spindle and ballscrews
1 - Radial Drill Press
- 11 inch Column
4 Foot Arm
Tilting Table
Other Machine Shop Equipment:
- Do-All Automatic Band Saw, Engine Lathe, Lagun Mill with Digital Readout, Sunnen Hone, Drill Presses, Cranes, Fork Lift
Measuring and Inspection Equipment:
- Large selection of Thread Gages, Setting Rings and Disks.